How Do I Setup my 6968 Printer?

HP OfficeJet 6968 all-in-one printers are one of the most popular streaming devices of all time since they are not just printers, but also copy machines and fax machines. These machines can help you perform all three tasks, and is sleek and slender as well. The printer can be installed and activated to be completely wireless and can be used to print documents from mobile phones as well.

In this blog, we will take you through the different steps in the 6968

installation, and help you print papers from both your computer and mobile phone. The printer can be connected to both wired and wireless internet, so please have an internet connection that you can connect the speakers to.

Once you have the internet connection down, please proceed with the installation. 6968 6968

Step 1 – Take the printer out of the box.

The first step in the printer’s installation is to unbox the printer, and make sure that the printer accessories are on point. Meaning, the printer cables must be intact. Usually, the printers come with a cable to connect themselves to the wall mount power socket and one wire to connect itself to the computer. Then, there will be a couple of cartridges, so please let your dealer know if any of those aren’t there.

  1. Connect the printer to the power port on the wall.
  2. Switch the printer on.
  3. Press and hold the power button to turn the printer on.
  4. Open the paper output tray, and insert the cartridges on to their slots. Push it till the cartridge goes click.
  5. Close the compartment, and open the printer’s paper input tray.
  6. In there, please load the necessary amount of papers needed.
  7. Please make sure not to overload the printer with paper. If you do so, there is a chance of paper clogging.

Once the printer’s power, papers and cartridges are on place, the printer will go ahead and print a sample paper, which you can use to check the alignment and other settings. IF you want to adjust the 6968 settings, please do so manually.

Step 2 – Download and install the printer’s driver on the computer

Now, all you have to do is to simply download the printer’s driver software on to the computer that you want to connect the printer to, and then make sure that the printer software is downloaded and installed before the printer is connected with the computer.

Please open the browser and go to the HP site. In there, please enter the model number, and the operating system. Printer model number is 6968 and the operating system is your input. Once these two are furnished, you will get to download the printer driver.

Step 3 – Connect the printer to the computer

Once you run the printer software, you can very well go ahead and follow the on-screen instructions. The instructions will at point ask you to connect the printer and the computer. It is enough if you turn the printer and the computer on then.

After connecting the printer to the computer, you can start printing from the computer. Before you buy the printer, please check if the computer and the OS that you are using to print is compatible. IF not, the print jobs might lag in the queue.

If you have any question regarding the installation of 6968 visit or please do let us know via our toll-free number, +1-888-800-3260. We are open 24*7!